Flooring insight
A Quality Inspector's Checklist for Karndean Flooring Thickness and Compliance
-
Step 1: Pin down the exact Karndean product code
-
Step 2: Verify Karndean flooring thickness against the actual build-up
-
Step 3: Check installation method and subfloor requirements
-
Step 4: Review compliance documents at the SKU level, not the brand level
-
Step 5: Clarify supply chain roles if you're a distributor or manufacturer
-
Step 6: Do a first-article inspection on the production batch
-
Notes from the field
I'm a quality and compliance manager at a flooring products company. I review every product specification and approval sample before it reaches customers—roughly 200 SKU-level evaluations each year. In 2024, I rejected about 3% of first submissions because the thickness or the test report didn't match the order.
This checklist is for anyone who has to make the call: architects, facility managers, a commercial tile distributor adding Karndean as an adjacent line, or a ceramic tile manufacturer evaluating a resilient flooring line. It's the same checklist I use before approving a batch for a 50,000-square-foot project.
Here's the six-step process. It's not glamorous, but it has caught more problems than all the marketing meetings combined.
Step 1: Pin down the exact Karndean product code
Karndean flooring isn't one material. It's a brand name covering multiple collections and build-ups. A quote that says only 'Karndean' or 'Karndean Art Select' is incomplete. Get the full product code, color code, wear layer, and installation method. If a supplier can't provide those details on the first request, that's a red flag.
Checkpoint: You should be able to write the exact SKU on the purchase order before the material arrives.
Step 2: Verify Karndean flooring thickness against the actual build-up
Karndean flooring thickness is the second thing I verify. There isn't a single answer, because glue-down planks are usually thinner than click-lock planks with an attached backing. Overall thickness affects door clearances, transition strips, and how the floor feels underfoot. The brochure number is a starting point, not a specification.
Action: Ask for the technical data sheet for the exact SKU. Measure the delivered sample with a caliper. For click products, check whether the stated thickness includes the backing layer. For glue-down, check the adhesive compatibility and the total build-up thickness including the adhesive film.
If you're a ceramic tile manufacturer moving into LVT, this is the biggest adjustment. Thickness is a spec, but it doesn't tell you about wear layer or core density. A thick plank with a thin wear layer can look fine for months and fail early.
Step 3: Check installation method and subfloor requirements
Korlok click and glue-down are not interchangeable. Each method has different subfloor tolerance, moisture requirements, and recommended adhesives. If the project has radiant heat, uneven subfloor, or schedule pressure, the method choice changes.
I once approved a rush order based on the product data sheet without checking the adhesive label on the boxes. Normally I'd wait for the physical sample and verify the full system. With the deadline, I made the call based on trust. In hindsight, I should have opened a box. The plank was right; the adhesive was a different formulation. It cost us two days and a $4,500 cleanup.
Checkpoint: Does the box label match the adhesive specified in the installation instructions?
Step 4: Review compliance documents at the SKU level, not the brand level
Ask for current test reports: VOC emissions, fire performance, slip resistance, and any local environmental criteria. This is the same mindset as elastomeric coating compliance requirements: you don't accept a coating because the can says 'elastomeric.' You verify the exact formulation, the applied thickness, and the test method. Flooring is no different.
Per FTC guidance (ftc.gov), performance and environmental claims have to be substantiated. If the sales sheet says 'recyclable backing' or 'low VOC,' ask to see the test report. If the rep says 'it's within industry standard,' ask which standard and which version.
Step 5: Clarify supply chain roles if you're a distributor or manufacturer
If you're a ceramic tile manufacturer or a commercial tile distributor adding Karndean to your portfolio, define the chain of responsibility before taking orders. Manufacturer warranty, distributor handling, installer workmanship—these are three different liabilities. When a locking system fails after installation, you need to know who responds and who pays.
For a 50,000-square-foot project, even a 1% defect rate means hundreds of square feet of problem area. Have a written protocol for sampling, claims, and replacement. Trust me, verbal agreements disappear when the budget does.
Step 6: Do a first-article inspection on the production batch
The showroom sample is a controlled marketing piece. The production batch can be different. Before approving a large order, request a sample from the actual lot, not just the catalog sample. Verify dimensions, thickness, color consistency, dye lot, bevels, and locking mechanisms.
I've caught three mismatches this way in the last two years—one where the thickness was right but the end joint didn't lock cleanly. That would have been a tripping hazard and an installation nightmare. Dodged a bullet, as they say.
Most people skip this step because the product is 'certified.' Certification doesn't guarantee every batch is perfect. On a large order, first-article inspection pays for itself.
Notes from the field
- Don't use one thickness number for every Karndean floor. The TDS and the physical sample have to agree.
- Water-resistant doesn't mean waterproof. Karndean is not universally waterproof across all ranges. Match the claim to the product and the project type.
- Keep records even for small jobs. A missing test report turned a $6,000 order into an $18,000 problem—I learned that one the hard way, though I don't remember the exact year.
- Verify current specs before you publish. This was accurate as of Q4 2024. Product lines and test standards change, so confirm the technical data sheet on the current date.