Flooring insight

Commercial LVT Flooring Procurement Checklist: 7 Steps from Karndean Selection to Daily Cleaning

2026-09-11 · Emilia Novak

Who This Checklist Is For

If you're the person ordering flooring for an office, retail space, or rental property—or managing a building that already has LVT (luxury vinyl tile) installed—this is for you. I handle facilities procurement for a 200-person company. I process roughly 60–70 building maintenance orders a year. Flooring is a significant chunk of that.

These 7 steps are what I wish someone had handed me five years ago. Follow them and you'll skip most of the mistakes I made the hard way.

Step 1: Check the Subfloor Before You Request a Single Quote

This is the step most people skip—myself included, back in 2021. You see a beautiful Karndean flooring sample, get a quote, place the order. Installers show up. The subfloor is uneven. Now you're either paying for leveling compound or accepting a floor that looks wavy under certain lighting.

Before you contact any vendor, have your facilities team verify:

  • Subfloor flatness (most LVT brands require no more than 3mm deviation over 3 meters)
  • Moisture levels (concrete slab needs a moisture test—this is non-negotiable)
  • Existing flooring type (tile, concrete, plywood—each one changes the prep work and adhesive requirements)

Every hour spent on subfloor verification saves multiple hours of back-and-forth later.

Step 2: Understand That "Karndean Flooring" Is Not One Product

Karndean has multiple ranges—Korlok, Knight Tile, Art Select, and others. Installation methods vary: click-lock, glue-down, loose lay. This matters because the installation method affects:

  • How flat your subfloor needs to be (click systems are more forgiving than glue-down)
  • Adhesive costs (glue-down installations require adhesive; click systems don't)
  • Repair flexibility (individual plank replacement vs. section replacement)

I've seen a purchase order that just said "Karndean flooring" with no range or installation method specified. The installer showed up expecting glue-down materials. The vendor had shipped click-lock. Three-week delay. Specs over brand. Every time.

Step 3: Request the Full Tile Adhesive Catalog—Not Just a Price

If you're going with glue-down LVT (which covers many Karndean ranges), the adhesive is the installation. Wrong adhesive means planks lifting within six months.

Ask your flooring supplier for their complete tile adhesive catalog. It should include:

  • Which adhesives work with which flooring types
  • Application scenarios (wet areas, underfloor heating, high-traffic zones)
  • Cure times and working times
  • Compatibility notes for Karndean or other LVT brands

Some vendors will hand you a generic catalog and say "these all work." That's a red flag. Ask for written confirmation of which adhesives are certified by the flooring manufacturer.

Step 4: Know What "Tile Adhesive Private Label" Actually Means

Private label adhesives—where a distributor contracts a factory to produce adhesive under their own brand—are everywhere now. That's not automatically a problem. But you need to understand three things:

  • Who makes it? Some private label products come from the same factories that make brand-name adhesives. Others come from much smaller operations.
  • Who backs the warranty? If the flooring brand requires its own certified adhesive and you use a private label alternative, your flooring warranty may be void.
  • Who do you call when something goes wrong? Brand adhesives come with manufacturer technical support. Private label may give you a single distributor contact.

My rule: if the flooring is still under warranty, use the flooring manufacturer's recommended adhesive. Once the warranty period ends, then consider private label for cost savings.

Saved around £200 on a private label adhesive once. The floor lifted in a bathroom six months later. Re-doing that room cost us £1,400. Net loss: £1,200.

Step 5: Clarify Protective Coating OEM vs Private Label

After LVT is installed, many commercial spaces add a protective coating to extend the floor's lifespan—especially in retail or food service environments with heavy foot traffic.

You have two paths:

  • OEM coating: Produced by the flooring brand or its designated partner. Compatibility is guaranteed. Price is typically higher.
  • Private label coating: Distributor-branded product. Better pricing, but you need to verify it won't react with the flooring surface.

It's tempting to think coatings are interchangeable. But the chemistry matters—especially on vinyl. Some coatings cause yellowing. Others affect slip resistance. Test on a small area before committing to a full order.

Step 6: Write the Cleaning Protocol Into the Purchase Contract

This is the most overlooked step—and the one that directly impacts warranty validity. How to clean Karndean flooring is not intuitive, and getting it wrong can void your warranty.

Karndean's official guidance:

  • Daily cleaning with a neutral pH cleaner (Karndean has its own line, but compatible alternatives exist)
  • No abrasive cleaners (they scratch the surface)
  • No steam mops (heat breaks down the adhesive bond)
  • No waxing (unless specified for a particular range—most modern LVT doesn't need it and can be damaged by it)

When I took over my current role, I discovered the cleaning crew had been using a bleach-based general-purpose cleaner on the Karndean flooring in our lobby. The surface had permanent haze damage. That was a £3,000 lesson nobody had budgeted for.

So: attach a cleaning protocol to your purchase order. Send it to your facilities team and your cleaning contractor. One page. Saves thousands.

Step 7: Verify That Invoice, Warranty, and Product Specs All Match

Last step. Also the one admin buyers most commonly overlook.

I've seen this scenario—and lived it: the vendor invoice says "LVT flooring." The warranty document references a specific model number. The actual delivery is a different range entirely. Finance rejects the invoice. The warranty claim gets denied. The installer is standing there with mismatched materials.

Before you place the order, confirm three things:

  1. The product description on the invoice matches your PO exactly (range name, dimensions, installation method)
  2. The warranty document is provided at delivery—not "we'll email it later"
  3. If private label adhesive or coating is involved, the warranty coverage is explicitly stated

I assumed "same specifications" meant identical products across vendors. Didn't verify. Turned out each had a slightly different interpretation of "Knight Tile." Learned never to assume after that one.

Notes and Common Mistakes

A few things I've learned the hard way:

  • Don't compare unit prices alone. Karndean flooring costs include material, adhesive, subfloor prep, and labor. Add those up before you compare vendors.
  • Order 10% extra. LVT needs cutting allowance and future repair stock. I've seen projects delayed two weeks because they were short by 2 square meters.
  • Confirm lead times early. Some Karndean ranges are imported. Lead times can run 4–6 weeks. Don't order the week before installation.
  • Buy cleaning products at the same time as the flooring. Ordering Karndean-recommended cleaner alongside the floor is far easier than sourcing it after installation.

This checklist isn't complicated. But it prevents about 90% of the problems I've run into. In my experience—and I've processed maybe 60, 55 flooring orders over five years, I'd have to check the system—the projects that went smoothly were the ones where someone asked the boring questions upfront.

The expensive ones? Those were the projects where we skipped a step because we were in a hurry.

Emilia Novak
Emilia Novak

Emilia Novak is a flooring and architectural-surfaces analyst covering ceramic and porcelain tile, natural stone, resilient flooring, underlayments, countertops, adhesives, grout, and installation accessories. She uses ASTM C373 and ASTM C648 test evidence while comparing water absorption, breaking strength, slab flatness, substrate moisture, joint width, slip resistance, and installed tolerances. Her specification guides help architects, contractors, and buyers match surface systems to traffic, wet-area exposure, maintenance demands, and substrate conditions.