Flooring insight
Is Karndean Flooring Good? A 7-Point Checklist for Commercial Flooring Distributors
-
Step 1: Define the project conditions before you compare products.
-
Step 2: Compare the specs that reflect the job, not just the biggest number.
-
Step 3: Open the boxes and measure what actually arrived.
-
Step 4: Validate the installation method against your local labor reality.
-
Step 5: Source the whole system, not just the flooring.
-
Step 6: Pressure-test the supply chain.
-
Step 7: Read the warranty's enforcement language.
-
Where distributors get this wrong
A distributor asked me recently whether Karndean flooring is good. I said: good for what?
Not the most charming answer, but I didn't mean it as evasion. I'm a quality compliance manager at a commercial flooring distributor. I review every product line before we offer it to customers—roughly 30 lines a year, mostly LVT, ceramic tile, and VCT. In 2024, we rejected about 20% of first-round samples because the physical product didn't match the published specifications. That experience changed the way I evaluate any 'is X good' question.
Distributors who ask about Karndean usually have a background in ceramic tile sourcing. They're seeing more commercial projects specify luxury vinyl, and they want to know if it's worth adding to their lineup. So here is the process we use. Seven steps. We ran this exact checklist when we added Karndean to our catalog, and we run it for every new line, whether it's LVT or ceramic tile.
Step 1: Define the project conditions before you compare products.
I know the appeal of jumping straight to spec sheets. If you know ceramic tile specifications, you know how to compare water absorption, PEI abrasion class, and breaking strength. LVT uses different metrics: wear layer thickness, total thickness, locking mechanism, and dimensional stability. But you can't translate between those languages until you know what's actually being asked of the floor.
I ask these questions first:
- What is the substrate? Concrete, plywood, existing VCT, or old tile?
- What are the moisture conditions? Has a moisture test already been done?
- What kind of traffic will the floor see: foot traffic, rolling loads, food service?
- Are there acoustic requirements between floors?
- Does the schedule allow for curing and drying times?
Then I write down three non-negotiables before reading a single spec sheet. In Q1 2024, we quoted a restaurant renovation where the slab moisture readings exceeded what the tile setting material allowed. The timeline left no room for moisture remediation. Ceramic tile wasn't a bad product there; it was the wrong product for those conditions. When we switched to evaluating an LVT system, the adhesive's moisture specification matched the readings, and the project moved forward.
That's the point of Step 1: you're not comparing 'tile vs LVT.' You're comparing two systems against a defined set of conditions. One will win; sometimes it's tile.
Step 2: Compare the specs that reflect the job, not just the biggest number.
If you're comparing ceramic tile and LVT, very few numbers line up directly. Ceramic tile is evaluated with PEI ratings, water absorption tests, and breaking strength. LVT is described by wear layer, total thickness, and locking system integrity. Slip resistance is measured on both, but not with the same methods. That makes it tempting to fall back on one simple comparison: warranty years. It's tempting to think two floors with similar warranty years are similar products. That ignores what the warranty actually covers, how installation affects the coverage, and how much maintenance the floor demands.
So, for LVT, we look for a few specific details:
- Wear layer thickness in mils, and what that wear layer is made of
- Whether the product has third-party emissions certifications, such as FloorScore
- Slip resistance for the actual environment: a wet entryway is not the same as a dry corridor
- Format consistency: squareness, gauge, and bevel consistency across planks
When we first evaluated Karndean, I appreciated that they published these details in their technical documents. Wear layer information, installation instructions, warranty documents, and maintenance guidance were all accessible. That doesn't make a product 'good'; it makes it possible to evaluate. If a manufacturer can't provide this documentation, that's already an answer.
Step 3: Open the boxes and measure what actually arrived.
A PDF is a promise. The sample is evidence.
We physically check thickness, squareness, and plank uniformity across multiple cartons and batch codes. We lock sample planks together from different boxes and feel for lippage. We check pattern and emboss consistency. And we put a sample under a loaded cart with some sand under the wheels—because that is what real commercial floors face.
In 2022, when we introduced our current verification protocol, about 12% of candidate products failed this kind of basic check. One LVT sample claimed a 20-mil wear layer; our gauge measured 18 mils across twelve samples. A 10% difference sounds small until you project it against ten years of commercial traffic.
Karndean flooring passed the physical checks when we ran them: consistent thickness, square edges, and clean locking profiles across multiple batch codes. To be clear, that doesn't make the product exceptional. Passing physical verification is the minimum bar—but it's where many products stumble.
Step 4: Validate the installation method against your local labor reality.
Most distributors compare installation methods on paper: glue-down versus click-lock. But the practical question is whether the local installer pool can actually execute the installation.
Karndean offers both glue-down and click-lock (Korlok) product lines, and they install very differently. Glue-down requires a flat, clean substrate, the correct adhesive, a full spread, and proper rolling. The click-lock line avoids adhesive, but it needs correct expansion gaps and a flat enough subfloor to avoid lippage. An installer who treats a click-lock floor like a generic floating floor and doesn't read the requirements will create problems that show up months later.
If you're adding Karndean flooring to a catalog, you should have at least one installer in your area who has completed training or is willing to do it. No manufacturer can guarantee a successful installation if the installer ignores the spec. A quality floor in the carton still depends on a quality installation at the job site.
Step 5: Source the whole system, not just the flooring.
Here's the step that most people skip. A flooring product is one component of a system. For Karndean, that means the recommended adhesive for glue-down, transition profiles, floor prep materials, and the manufacturer's care products. For ceramic tile, it means setting materials, grout, sealers, and maintenance products. Each product has its own ecosystem, and the ecosystems are not interchangeable.
If the floor is specified correctly but the facility team uses the wrong cleaning chemistry, the floor can look worn within months—and a warranty claim can be denied. We saw this happen on a project in 2023, and the cost of that mistake was far higher than any savings from choosing generic maintenance products. Now we ask about the maintenance system during product evaluation. As a commercial distributor, the margin and the risk are both in the system, not just in the planks.
Step 6: Pressure-test the supply chain.
The best floor in the industry doesn't help if it isn't available when your customer needs it.
In 2021, we swapped a line to save 6% on material cost. The first two orders were fine. The third arrived with a different batch code and visible shade variation. We spent $18,000 in expedited freight to replace it before the customer's opening date. The savings never materialized.
Since 2022, we have used a standardized digital scorecard to evaluate every new supplier. Lead time, fill rate, batch consistency, minimum order quantities, and response times—same questions, same format, same weighting. It sounds dull, but it cut our evaluation turnaround from four weeks to about ten days. I'm not going to pretend that digital tools replace relationships; in a genuine crisis, a scorecard won't tell you if someone answers the phone. But it filters out the vendors who would not answer at all.
When we evaluated Karndean, supply chain questions mattered as much as the wear layer. Where is the regional stock? Can the local distributor support a large commercial order? Is the product line stable? The answers to those questions are part of why we now stock the line.
Step 7: Read the warranty's enforcement language.
Last, but not least. If a product says '15-year commercial warranty,' the question is not how long the warranty lasts; it's what the warranty actually requires for coverage.
Most LVT warranties include installation requirements, subfloor moisture test requirements, and maintenance requirements. They often state that the floor must be cleaned with approved products and that installation documentation must be retained. If those conditions aren't met, a '15-year warranty' can become a four-year claim denial. The claim process matters too: who do you call? What evidence is needed? How long does the claim take?
When we added Karndean, we asked for warranty language and maintenance documentation before we signed anything. They provided the documents we needed to evaluate. That may sound like a low bar, but you'd be surprised how many suppliers can't locate their own claims procedure when you ask.
Where distributors get this wrong
If you're still asking 'is Karndean flooring good' in the abstract, you're asking the wrong version of the question. The more useful version is: is this system good for the conditions of this particular project?
The other common mistakes are:
- Comparing warranty years while ignoring what voids the coverage.
- Trusting published specs without measuring a physical sample.
- Assuming all LVT products handle water in the same way. Water-resistance claims are product-specific, not category-wide.
- Ordering the floor without planning for adhesives, transitions, underlayments, and cleaning products.
- Forgetting that even a skilled installer can only perform as well as the specification allows.
Is Karndean flooring good? Yes, for projects where the specs, installation conditions, maintenance routine, and supply chain fit.
Is it the right answer for every commercial job? No. There are still projects where ceramic tile, carpet, or other materials are the better fit. That's why a distributor doesn't have to declare one category the winner. You carry multiple solutions, and you match each one to what the building actually needs.
That's not a weak answer. It's the only answer a quality manager can give honestly. The checklist is how we get there.