Flooring insight
Karndean Flooring Buying Guide: Scenarios for Commercial Buyers (2025)
I've been managing office purchases for about five years now—roughly 60-80 orders annually across three locations. When I took over purchasing in 2020, I made a lot of assumptions. One of them was that expensive floors were the best floors. That was wrong. The best floor is the one that fits your scenario.
I report to both operations and finance, so durability and ROI matter to me. If you're looking at Karndean flooring, you probably already know it's a premium luxury vinyl tile (LVT) brand with realistic wood and stone designs. What you might not know is when to choose it—and when to go a different route. There's no universal answer. It depends on the scenario.
Three Scenarios, Three Answers
After five years of buying for offices, break rooms, and training spaces, I've learned to separate flooring decisions into three scenarios:
- Scenario A: You're specifying Karndean for a commercial fit-out where looks and durability matter.
- Scenario B: You're dealing with a wet or high-moisture area where water resistance matters more than aesthetics.
- Scenario C: You're comparing cost against laminate through a distributor, and you need a practical buying guide.
Each has a different answer. I'll walk through how I approach them—and where Karndean fits.
Scenario A: Karndean for a Commercial Fit-Out
This is where Karndean luxury vinyl flooring earns its reputation. You get the look of hardwood or natural stone without the maintenance burden. It's durable, repairable, and trusted by architects and interior designers. If you're doing a client-facing office or a high-end meeting room, Karndean is a strong choice.
But there's a catch: installation. The final floor's quality depends as much on prep and adhesive as on the planks themselves. For glue-down products, you have to specify the right tile adhesive specifications. That means the correct trowel notch, correct drying time, and correct adhesive for your substrate. Karndean's installation instructions are public—use them.
In my first year, I made the classic specification error: assuming 'commercial grade' meant the same thing to every manufacturer. It doesn't. One manufacturer's commercial VCT is not the same as Karndean's commercial LVT. The wear layer, backing, and warranty are different. I learned that when a supplier substituted a budget product and the floor started peeling at the seams within eight months. That redo cost us $3,200 and a lot of embarrassment.
People think expensive vendors deliver better quality. Actually, vendors who deliver consistent quality can charge more. The causation runs the other way. I don't have hard data on how many LVT failures come from poor adhesive selection, but based on my orders, my sense is that most callbacks trace back to substrate prep or adhesive. Karndean can't prevent bad installation. You can only prevent it by controlling the spec.
If the floor is in a client-facing space, this is also a brand decision. A reception floor is the first thing visitors touch. If it feels hollow or looks worn, they assume your service is also hollow. When I switched from a low-end LVT to Karndean in our main entrance, the difference was noticeable immediately. Not because clients knew the brand, but because the space felt more solid. That's the quality-perception effect: the floor is an extension of your company.
Scenario B: When You Should Choose Ceramic Tile Instead
The counter-intuitive one: for true wet areas, I steer people away from Karndean and toward ceramic tile. That surprises people, because Karndean looks so good in showrooms. But LVT is water-resistant, not waterproof. If water pools on the surface and sits at the seams long enough, it can seep into the core. For a commercial kitchen, a shower room, or an uncovered entrance in a rainy climate, I'd call a ceramic tile manufacturer or a local tile distributor instead.
Ceramic tile has its own adhesive must-haves. Tile adhesive specifications for ceramic tile involve ANSI A118.1 for thin-set mortar, plus the tile manufacturer's approval for the specific mortar and expansion joints. It's not simpler than LVT. It's different. But in a wet room, ceramic tile gives you a hard, impervious surface that LVT can't match.
Honestly, I'm not sure why some facility managers default to LVT everywhere just because it feels warmer underfoot. I assume it's because carpet and LVT are more comfortable. But standing water is a different animal. If you can't guarantee immediate drying, choose ceramic tile.
That doesn't mean Karndean is bad. It means every material has a job. For a break room with a sink and occasional splashes, Karndean is fine. For a public bathroom where people track water in from a pool deck, no.
Scenario C: Laminate Distributor Buying Guide—When Laminate Makes Sense
If you're reading a laminate flooring distributor buying guide because you're weighing laminate against luxury vinyl, here's my practical take.
Laminate is a high-pressure product with a fiberboard core. It's usually cheaper per square foot than Karndean LVT. In dry, low-traffic spaces, laminate can look surprisingly close to real wood. For a conference room that only hosts weekly meetings, I'd consider it.
But laminate has a weakness: moisture. Even 'water-resistant' laminate isn't the same as LVT. One overflowing planter or a spilled drink left overnight can swell the planks. That's why I keep a spare box of every laminate order. (I learned that the hard way when a manufacturer discontinued a colorway and I couldn't match it—ugh.)
In our 2024 vendor consolidation project, I compared 1,500 square feet of laminate versus 1,500 square feet of Karndean Korlok click. The laminate was about $1.30/sq ft cheaper on material. But after adding moisture-resistant underlayment, transition strips, and extra waste, the gap shrank to $0.60. Factor in the cost of a potential water-damage claim, and the gap disappears.
What I mean is: don't buy laminate on price alone. Ask about the AC rating, whether it meets NALFA certification, and the manufacturer's policy on discontinued colors. A good laminate flooring distributor will answer honestly. One who doesn't is a red flag.
How to Tell Which Scenario You're In
By now you've probably guessed which one applies to you. But here's a simple three-question checklist:
- Does water touch this floor regularly? If yes, lean toward ceramic tile from an established ceramic tile manufacturer. If no, LVT or laminate is fine.
- Is this a client-facing space? If yes, Karndean luxury vinyl flooring is worth the investment. If it's a back office or storage room, a lower-cost option may be acceptable.
- Who is installing it? If the installers aren't trained on LVT, choose a click system like Karndean Korlok instead of glue-down. That eliminates a lot of adhesive-spec risk.
The third question is the one most people skip. I've seen beautiful Karndean flooring ruined by an installer who didn't follow the tile adhesive specifications. I've also seen budget laminate perform fine because the installer had experience with it. Installation is not a detail. It's the difference between a floor that lasts and a floor that fails.
The Bottom Line
Karndean is a trusted spec-grade brand. I use it in reception areas, meeting rooms, and open office spaces. But it isn't the answer for every floor. Ceramic tile manufacturers have their place, and laminate distributors can be a smart source for low-risk jobs.
The key is to match the product to the scenario—not to your favorite showroom. A floor that looks amazing but fails in service will reflect on your judgment. A floor that looks decent but holds up well will make you look smart. Quality is not an expense. It's your brand on the floor.
If I could give you one piece of advice, it's this: write down your scenario before you start pricing. Then buy for that scenario. That's it.