Flooring insight
LVP Flooring Specification Guide: 7 Questions Commercial Buyers Actually Ask
-
1. What actually belongs in an LVP flooring specification guide?
-
2. How do you compare Karndean flooring to other LVT without getting fooled?
-
3. Do we need a floor underlayment distributor, or can we source locally?
-
4. Is "waterproof" a specification or a marketing word?
-
5. Where does mosaic tile fit into a commercial flooring package?
-
6. What hidden costs actually blow up LVP flooring budgets?
-
7. How do you tell whether a flooring supplier is worth keeping?
I'm a procurement manager at a 140-person commercial interiors contractor. I've managed our flooring materials budget — roughly $2.1M a year — for the past eight years, and I've negotiated with 60-plus vendors to get there.
Most LVP budget problems get decided in the specification, not at the point of purchase. What follows are the seven questions that come up in almost every pre-construction meeting, plus a couple that should come up and usually don't.
Quick map: spec guide contents, comparing Karndean flooring to other LVT, whether you need a floor underlayment distributor, what "waterproof" actually means, where mosaic tile fits, where the hidden costs hide, and how to vet a supplier.
1. What actually belongs in an LVP flooring specification guide?
Three things: the product spec, the substrate conditions, and the installation system. In my opinion the installation system is the one that gets skipped, and it's the one that generates change orders.
Product spec means wear layer in mils (not "thick"), total thickness, format, edge profile, and the relevant ASTM line. Rigid-core modular flooring sits under ASTM F3261; solid vinyl tile falls under ASTM F1700. Commercial corridors typically trigger ASTM E648 radiant flux requirements as well. If your spec sheet just says "premium LVT," you don't have a spec — you have a preference.
Substrate means ASTM F2170 in-situ relative humidity or ASTM F1869 calcium chloride testing, plus prep per ASTM F710. Installation means the adhesive, the trowel notch, open time, and who is actually certified to install it. Those last two sentences are where bids diverge by 30%.
We didn't have a formal submittal approval process for flooring. Cost us when a substituted adhesive showed up on site with a different open time than the spec called for. Nothing failed, but the crew lost most of a day waiting. The third time something like that happened, I built a one-page submittal checklist. Should have done it after the first time.
2. How do you compare Karndean flooring to other LVT without getting fooled?
Compare the same fields off every sheet. Wear layer, total thickness, format, edge treatment, installation method, adhesive system, warranty term. A 20-mil glue-down tile and a 12-mil click plank aren't the same line item even when the square-foot price looks close.
Karndean luxury vinyl tiles are a reasonably clean example of how the data should be presented. Wear layer, total thickness, recommended adhesive, and installation method are published per range, and the ranges aren't interchangeable. Korlok is a click system. Knight Tile and Art Select are glue-down. Mixing ranges within one project is fine visually; mixing their installation requirements inside one scope is where bids go sideways and where installers start asking questions you don't have answers to.
Other manufacturers publish similar data. The comparison only works if you pull the same fields off every sheet and normalize labor separately from material. Otherwise you're comparing a material price to an installed price and calling it a decision.
3. Do we need a floor underlayment distributor, or can we source locally?
Depends on the system. Glue-down flooring usually doesn't take a separate underlayment — the adhesive is the system, and adding a pad underneath can void the warranty. Floating and click installations do need one, often for acoustics. If the project carries an IIC or STC requirement from the code or the developer, that number drives the underlayment choice, not the flooring SKU.
A distributor earns its margin on pallet quantities, staged deliveries, and consistent dye lots across a phased job. Local purchase wins on small breaks and same-week pickups. There's no universal right answer, but there is a wrong one: picking based on the unit price and ignoring freight class and delivery windows.
Looking back, I should have paid for the expedited freight on a 14,000 sq ft job back in 2023. At the time, the standard delivery window looked safe against the schedule. It wasn't. We paid for overtime instead, roughly four times the freight premium. I've had a freight contingency line in our TCO sheet ever since.
4. Is "waterproof" a specification or a marketing word?
Here's the thing: it's both, and you have to know which one you're buying. Not all Karndean floors are 100% waterproof — the ranges differ, and any supplier who tells you otherwise is glossing over the product line.
Two separate questions get collapsed into one word. First, water on top: spills, mopping, standing water in a vestibule. Second, moisture from below: vapor coming up through the slab. A rigid core handles the first pretty well. Nothing handles the second except proper testing, the right adhesive, and sometimes a vapor retarder.
I skipped the wet-area review on a restroom-adjacent corridor once because "it's not really a wet area." That was the one project where a seam lifted. In my opinion, if the spec doesn't separately address surface water and subfloor moisture, you don't have waterproofing — you have a warranty claim to make later.
5. Where does mosaic tile fit into a commercial flooring package?
Usually as an accent — a lobby inlay, a feature border, restrooms, a branded entry marker. It looks like a small line item. Structurally, it isn't.
Mosaic is a different trade with a different spec path: ANSI A118.4 or A118.15 mortar, the correct TCNA method for the substrate, movement joints that don't get value-engineered out, and a cure schedule that has to sequence before grout, then sealing, then furniture placement. Height is the other one. A mortar-bed mosaic assembly and a 4mm LVT plank don't finish at the same elevation, so either you spec a transition strip or you recess the slab. Recessing is better and always costs more.
Per square foot it's expensive. Per project it's usually small enough that cutting it from the bid is a false economy — you'll add it back at premium rates as a change order after the client sees the sample board.
6. What hidden costs actually blow up LVP flooring budgets?
Moisture testing, floor prep, and — critically — trim. Those three account for more of our overruns than the flooring material itself.
- Moisture testing. ASTM F2170 probe testing is priced per location, and the location count scales with slab area and pour dates. It's a real line item, not a rounding error.
- Floor prep. Self-leveler and patching are sold by the bag and applied by the hour. Every spec says "flat within manufacturer tolerance"; that tolerance is measured in fractions of an inch over ten feet, and slabs rarely arrive there.
- Adhesive coverage. The number printed on the bucket is best-case for a perfect trowel on a perfect substrate. Budget 10–15% more.
- Transitions and stair nosings. Priced per piece, not per square foot. Stairwells eat budgets quietly.
- Attic stock. Most warranties require it. 5% is common — check the actual warranty document, not the summary.
- Freight, liftgate, and waste factor. 7–10% waste for a straight lay, more for directional or patterned installs.
As of January 2025, I'd budget prep and trim at 15–20% of flooring material cost on a retrofit. On new construction over a fresh slab it runs lower — fairly predictable, honestly. Verify current pricing with your own suppliers, since regional labor rates move faster than published material lists.
7. How do you tell whether a flooring supplier is worth keeping?
Ask for the last three projects where they supplied the same product, then call those GCs. Ask who trains their installers and whether the training is manufacturer-specific. Ask for the warranty document rather than the warranty summary. Our procurement policy now requires quotes from three vendors minimum because of how often those three questions changed the answer.
Never expected the "expensive" quote to be the cheaper one after TCO, but it's happened twice now. The premium supplier included moisture testing, trim, and freight inside their number; the low quote was material only. On an $84,000 flooring package, the gap closed to about 4% — and the premium option came with a single point of accountability instead of four.
There's something satisfying about the version of this where the client walks into the finished space and the floor reads as the quality of the entire project. It's the largest surface in the room. It's what people touch. If you ask me, money spent on a spec-grade product is a client-perception line item, not a materials line item — and that argument holds up as long as you're honest about where the real numbers land.